Tells a2p that this awk script is always invoked with this -F switch.
-n
Specifies the names of the input fields if input does not have to be split into an array. If you were translating an awk script that processes the password file, you might say:
a2p -7 -nlogin.password.uid.gid.gcos.shell.home
Any delimiter can be used to separate the field names.
-
Causes a2p to assume that input will always have that many fields.
-o
Tells a2p to use old awk behavior. The differences are:
that old awk always has a line loop even if there are no line actions, whereas new awk does not; and
in old awk, sprintf is extremely greedy about its arguments.
For example, given the statement:
print sprintf(some_args), extra_args;
old awk considers extra_args to be arguments to sprintf; new awk considers them arguments to print.
a2p cannot do as good a job translating as a human would, but it
usually does pretty well.
There are some areas where you may want to
examine the perl script produced and tweak it some. Here are some of them, in no particular order.
There is an awk idiom of putting int() around a string expression to force numeric interpretation, even though the argument is always integer anyway. This is generally unneeded in perl, but a2p can't tell if the argument is always going to be integer, so it leaves it in. You may want to remove it.
Perl differentiates numeric comparison from string comparison. Awk has one operator for both that decides at run time which comparison to do. A2p does not try to do a complete job of awk emulation at this point. Instead it guesses which one you want. It's
almost always right, but it can be spoofed. All such guesses are marked
with the comment ""#???"". You should go through and check them. You might want to run at least once with the -w switch to perl, which will warn you if you use == where you should have used eq.
Perl does not attempt to emulate the behavior of awk in which nonexistent array elements spring into existence by being referenced. If somehow you are
relying on this mechanism to create null entries for a subsequent for...in, they won't be there in perl.
If a2p makes a split line that assigns to a list of variables that looks like (Fld1, Fld2, Fld3...) you may want to rerun a2p using the -n option mentioned above. This will let you name the fields throughout
the script. If it splits to an array instead, the script is probably
referring to the number of fields somewhere.
The exit statement in awk doesn't necessarily exit; it goes to the END block if there is one. Awk scripts that do contortions within the END block to bypass the block
under such circumstances can be simplified by removing the conditional
in the END block and just exiting directly from the perl script.
Perl has two kinds of array, numerically-indexed and associative. Perl associative arrays are called "hashes". Awk arrays are usually translated to hashes, but if you happen to know that
the index is always going to be numeric you could change the {...} to [...].
Iteration over a hash is done using the keys() function, but iteration
over an array is NOT. You might need to modify any loop that iterates
over such an array.
Awk starts by assuming OFMT has the value %.6g. Perl starts by assuming its equivalent, $#, to have the value %.20g. You'll want to set $# explicitly if you use the default value of OFMT.
Near the top of the line loop will be the split operation that is implicit in the awk script. There are times when you can move this down past some
conditionals that test the entire record so that the split is not done
as often.
For aesthetic reasons you may want to change index variables from being 1-based (awk style) to 0-based (Perl style). Be sure to change all operations the variable is involved in to match.
Immature comments such as "# perl is better than awk" are not modified, and pass through as-is.
Awk scripts are often embedded in a shell script that pipes stuff into and out of awk. Often the shell script wrapper can be incorporated into the perl script, since perl can start up pipes into and out of itself, and can do other things that awk can't do by itself.
Scripts that refer to the special variables RSTART and RLENGTH can often be simplified by referring to the variables $`, $& and $', as long as they are within the scope of the pattern match that sets them.
The produced perl script may have subroutines defined to deal with awk's semantics regarding getline and print. Since a2p usually picks correctness over efficiency. It is almost always possible
to rewrite such code to be more efficient by discarding the semantic
sugar.
For efficiency, you may want to remove the keyword from any return
statement that is the last statement executed in a subroutine. a2p catches the most common case, but doesn't analyze embedded blocks for subtler cases.
ARGV[0] translates to $ARGV0, but ARGV[n] translates to $ARGV[$n-1]. A loop that tries to iterate over ARGV[0] won't find it.
查看英文版
查看中文版
a2p 示例
a2p myfile.awk
此命令將讀取文件myfile.awk并將同一腳本的perl版本輸出到標準輸出。
要將輸出寫入文件，請使用以下命令：
a2p myfile.awk > myfile.pl
a2p myfile.awk
This command will read the file myfile.awk and output the perl version of the same script to standard output. To write the output to a file, use the following command:
a2p (從標準輸入取得一個awk腳本文件， 并且向標準輸出產生一個相同功能的 perl 腳本文件。)
a2p 從命令行或標準輸入取得一個awk腳本文件， 并且向標準輸出產生一個相同功能的 perl 腳本文件。
The a2p utility takes an awk script specified on the command line and produces a comparable perl script on standard output.
查看英文版
查看中文版
1 a2p 運行系統環境
2 a2p 語法
3 a2p 選項
4 a2p 注意事項
5 a2p 示例
a2p 運行系統環境
Unix&Linux
a2p 語法
查看英文版
查看中文版
a2p 選項
-D
設置調試標記
-F
告訴a2p，awk腳本總是帶 -F 選項執行。
-n
如果輸入不分解為一個數組，你需要指定輸入的各字段的名稱。
-
使a2p假定輸入將始終具有這么多字段。
-o
告訴a2p使用舊的awk行為。當前，唯一的區別是舊的awk總是有一個 每行的循環，即使沒有對每行的操作；新的awk不是這樣。
-D
Sets debugging flags.
-F
Tells a2p that this awk script is always invoked with this -F switch.
-n
Specifies the names of the input fields if input does not have to be split into an array. If you were translating an awk script that processes the password file, you might say:
a2p -7 -nlogin.password.uid.gid.gcos.shell.homeAny delimiter can be used to separate the field names.
-
Causes a2p to assume that input will always have that many fields.
-o
Tells a2p to use old awk behavior. The differences are:
that old awk always has a line loop even if there are no line actions, whereas new awk does not; and
in old awk, sprintf is extremely greedy about its arguments.
For example, given the statement:
print sprintf(some_args), extra_args;old awk considers extra_args to be arguments to sprintf; new awk considers them arguments to print.
查看英文版
查看中文版
a2p 注意事項
a2p不能像我們人那樣出色地完成翻譯工作，但通常做得很好。
在某些區域中，您可能需要檢查生成的perl腳本并對其進行一些調整。
a2p cannot do as good a job translating as a human would, but it usually does pretty well.
There are some areas where you may want to examine the perl script produced and tweak it some. Here are some of them, in no particular order.
查看英文版
查看中文版
a2p 示例
此命令將讀取文件myfile.awk并將同一腳本的perl版本輸出到標準輸出。
要將輸出寫入文件，請使用以下命令：
查看英文版
查看中文版
其他命令行
apt-cache | apt-get | ar | arch | arp | as | aspell | ac | at | awk | adduser | apropos | alias | agrep | addgroup |