cut OPTION... [FILE]...

Options

Usage Notes

When invoking cut, use the -b, -c, or -f option, but only one of them.

If no FILE is specified, cut reads from the standard input.

Specifying LIST

Each LIST is made up of an integer, a range of integers, or multiple integer ranges separated by commas. Selected input is written in the same order that it is read, and is written to output exactly once. A range consists of:

For example, let's say you have a file named data.txt which contains the following text:

one	two	three	four	five
alpha	beta	gamma	delta	epsilon

In this example, each of these words is separated by a tab character, not spaces. The tab character is the default delimiter of cut, so it will by default consider a field to be anything delimited by a tab.

To "cut" only the third field of each line, use the command:

cut -f 3 data.txt

...which will output the following:

three
gamma

If instead you want to "cut" only the second-through-fourth field of each line, use the command:

cut -f 2-4 data.txt

...which will output the following:

two	three	four
beta	gamma	delta

If you want to "cut" only the first-through-second and fourth-through-fifth field of each line (omitting the third field), use the command:

cut -f 1-2,4-5 data.txt

...which will output the following:

one	two	four	five
alpha	beta	delta	epsilon

Or, let's say you want the third field and every field after it, omitting the first two fields. In this case, you could use the command:

cut -f 3- data.txt

...which will output the following:

three	four	five
gamma	delta	epsilon

Specifying a range with LIST also applies to cutting characters (-c) or bytes (-b) from a line. For example, to output only the third-through-twelfth character of every line of data.txt, use the command:

cut -c 3-12 data.txt

...which will output the following:

e	two	thre
pha	beta	g

Remember that the "space" in between each word is actually a single tab character, so both lines of output are displaying ten characters: eight alphanumeric characters and two tab characters. In other words, cut is omitting the first two characters of each line, counting tabs as one character each; outputting characters three through twelve, counting tabs as one character each; and omitting any characters after the twelfth.

Counting bytes instead of characters will result in the same output in this case, because in an ASCII-encoded text file, each character is represented by a single byte (eight bits) of data. So the command:

cut -b 3-12 data.txt

...will, for our file data.txt, produce exactly the same output:

e	two	thre
pha	beta	g

Specifying A Delimiter Other Than Tab

The tab character is the default delimiter that cut uses to determine what constitutes a field. So, if your file's fields are already delimited by tabs, you don't need to specify a different delimiter character.

You can specify any character as the delimiter, however. For instance, the file /etc/passwd contains information about each user on the system, one user per line, and each information field is delimited by a colon (":"). For example, the line of /etc/passwd for the root user may look like this:

root:x:0:0:root:/root:/bin/bash

These fields contain the following information, in the following order, separated by a colon character:

1. Username
2. Password (shown as x if encrypted)
3. User ID number (UID)
4. Group ID number (GID)
5. Comment field (used by the finger command)
6. Home Directory
7. Shell

The username is the first field on the line, so to display each username on the system, use the command:

cut -f 1 -d ':' /etc/passwd

...which will output, for example:

root
daemon
bin
sys
chope

(There are many more user accounts on a typical system, including many accounts specific to system services, but for this example we will pretend there are only five users.)

The third field of each line in the /etc/passwd file is the UID (user ID number), so to display each username and user ID number, use the command:

cut -f 1,3 -d ':' /etc/passwd

...which will output the following, for example:

root:0
daemon:1
bin:2
sys:3
chope:1000

As you can see, the output will be delimited, by default, using the same delimiter character specified for the input. In this case, that's the colon character (":"). You can specify a different delimiter for the input and output, however. So, if you wanted to run the previous command, but have the output delimited by a space, you could use the command:

cut -f 1,3 -d ':' --output-delimiter=' ' /etc/passwd

root 0
daemon 1
bin 2
sys 3
chope 1000

But what if you want the output to be delimited by a tab? Specifying a tab character on the command line is a bit more complicated, because it is an unprintable character. To specify it on the command line, you must "protect" it from the shell. This is done differently depending on which shell you're using, but in the Linux default shell (bash), you can specify the tab character with $'\t'. So the command:

cut -f 1,3 -d ':' --output-delimiter=$'\t' /etc/passwd

...will output the following, for example:

root	0
daemon	1
bin	2
sys	3
chope	1000

cut -c 3 file.txt

Output the third character of every line of the file file.txt, omitting the others.

cut -c 1-3 file.txt

Output the first three characters of every line of the file file.txt, omitting the rest.

cut -c -3 file.txt

Same as the above command. Output the first three characters of every line of file.txt.

cut -c 3- file.txt

Output the third through the last characters of each line of the file file.txt, omitting the first two characters.

cut -d ':' -f 1 /etc/passwd

Output the first field of the file /etc/passwd, where fields are delimited by a colon (':'). The first field of /etc/passwd is the username, so this command will output every username in the passwd file.

grep '/bin/bash' /etc/passwd | cut -d ':' -f 1,6

Output the first and sixth fields, delimited by a colon, of any entry in the /etc/passwd file which specifies /bin/bash as the login shell. This command will output the username and home directory of any user whose login shell is /bin/bash.