The edit command is a legacy 16-bit program, which is incompatible with 64-bit operating systems. Therefore, 64-bit versions of Windows do not come installed with, and cannot run, the edit command. On 64-bit Windows systems, use Notepad to edit files instead. See: Why is the edit command missing in Windows?
查看英文版
查看中文版
目錄
1 edit 運行系統環境
2 edit 語法
3 edit 示例
4 補充資料
edit 運行系統環境
Windows 95
Windows 98
Windows xp
Windows vista
Windows 2000
Windows 7
MS-DOS 5.0 及以上版本
Windows NT
Windows ME
edit 語法
EDIT [/B] [/H] [/R] [/S] [/] [/?] [FileName...]
/B
強制使用單色模式。
/H
顯示硬件可能的最大行數。
/R
以只讀模式加載文件。
/S
強制使用短文件名。
/
加載二進制文件，將行換行為字符寬度。
/?
顯示命令行選項的摘要。
[FileName...]
指定要加載的初始文件?？梢蕴峁┩ㄅ浞投鄠€文件規格。
EDIT [/B] [/H] [/R] [/S] [/] [/?] [FileName...]
/B
Forces monochrome mode.
/H
Displays the maximum number of lines possible for your hardware.
/R
Load file(s) in read-only mode.
/S
Forces the use of short file names.
/
Load binary file(s), wrapping lines to characters wide.
/?
Display a summary of command line options.
[FileName...]
Specifies initial files(s) to load. Wildcards and multiple file specs can be given.
Open the file c:\autoexec.bat to be edited, if it exists. If the file does not exist, a blank blue screen is shown.
Using "copy con"
If you are running an MS-DOS version 4.x or lower or you cannot find edit.com on your hard drive, you can also use the following command to create a file.
copy con FileName
Once you have entered the command above, a file with the name specified is created.
Once you have typed all the lines you want to be in the file, press and hold Ctrl+Z. Once you see "^Z" on the screen, press Enter and one file should be copied.
Using edit to create a new file
Using edit, you can also create a new file. For example, if you wanted to create a file called myfile.txt, you would type the command below.
edit myfile.txt
This command would bring up a blank edit screen. Type your text and save the file, and myfile.txt will be created with the text you entered.
如果您使用的是在64位處理器下運行的新版本的Windows，則edit命令不會起作用。
If you are using new versions of Windows running under a 64-bit processor, the edit command no longer works.
Edit is only able to open a file with a maximum of 65,280 lines.
If your mouse drivers are not loaded while in MS-DOS or the Windows command line, you may have no mouse support. It is still possible to navigate the Editor using shortcut keys as seen in the below list.
Pressing Alt allows you to quickly navigate through edit without having to memorize all the commands listed below.
Commands available in edit
Home
Move cursor to the beginning of the line.
End
Move cursor to the end of the line.
Ctrl+Up
Scroll up one line.
Ctrl+Down
Scroll down one line.
PageUp
Scroll up one screen.
PageDown
Scroll down one screen.
Ctrl+PageUp
Scroll left one screen.
Ctrl+PageDown
Scroll right one screen.
Ctrl+Home
Scroll to the top of the document.
Ctrl+End
Scroll to the bottom of the document.
Ctrl+Left
Move left one word.
Ctrl+Right
Move right one word.
Enter
Starts a new line or moves text after cursor down.
Delete (Del)
Deletes one character that cursor is on or currently selected text.
Backspace
Deletes one character before the cursor.
Tab
Moves cursor or text to the next tab stop, or indents line if at first character.
Insert
Switch between insert and overwrite modes.
Ctrl+Y
Deletes the current line.
Ctrl+V
Pastes contents currently in the buffer, if any.
Ctrl+P
Allows special characters to be inserted into edit.
Shift
Using shift in combination with any of the above scrolling or moving commands highlights text, such as Ctrl+Shift+Right.
edit (允許查看、創建或修改文件)
MS-DOS文本編輯器edit允許您查看、創建或修改計算機上的任何文本文件。
The MS-DOS text editor, edit, allows you to view, create, or modify any text file on your computer.
Edit命令是傳統的16位程序，與64位操作系統不兼容。因此，64位版本的Windows不會隨編輯命令一起安裝，也不能運行。在64位Windows系統上，請改用記事本編輯文件。
The edit command is a legacy 16-bit program, which is incompatible with 64-bit operating systems. Therefore, 64-bit versions of Windows do not come installed with, and cannot run, the edit command. On 64-bit Windows systems, use Notepad to edit files instead. See: Why is the edit command missing in Windows?
查看英文版
查看中文版
1 edit 運行系統環境
2 edit 語法
3 edit 示例
4 補充資料
edit 運行系統環境
Windows 95
Windows 98
Windows xp
Windows vista
Windows 2000
Windows 7
MS-DOS 5.0 及以上版本
Windows NT
Windows ME
edit 語法
查看英文版
查看中文版
edit 示例
打開要編輯的文件c：\autoexec.bat(如果存在)。如果該文件不存在，則會顯示一個空白的藍屏。
Using "copy con"
如果您運行的是MS-DOS 4.x版或更低版本，或者在硬盤上找不到edit.com，也可以使用以下命令創建文件。
輸入上述命令后，將創建一個具有指定名稱的文件。
一旦您輸入了要放在文件中的所有行，請按住Ctrl+Z。一旦在屏幕上看到“^Z”，按Enter即可復制一個文件。
使用edit創建新文件
使用edit，還可以創建新文件。例如，如果您想創建一個名為myfile.txt的文件，您可以輸入以下命令。
此命令將彈出一個空白edit屏幕。鍵入文本并保存文件，然后myfile.txt文件將使用您輸入的文本創建。
Open the file c:\autoexec.bat to be edited, if it exists. If the file does not exist, a blank blue screen is shown.
Using "copy con"
If you are running an MS-DOS version 4.x or lower or you cannot find edit.com on your hard drive, you can also use the following command to create a file.
Once you have entered the command above, a file with the name specified is created.
Once you have typed all the lines you want to be in the file, press and hold Ctrl+Z. Once you see "^Z" on the screen, press Enter and one file should be copied.
Using edit to create a new file
Using edit, you can also create a new file. For example, if you wanted to create a file called myfile.txt, you would type the command below.
This command would bring up a blank edit screen. Type your text and save the file, and myfile.txt will be created with the text you entered.
如果您使用的是在64位處理器下運行的新版本的Windows，則edit命令不會起作用。
If you are using new versions of Windows running under a 64-bit processor, the edit command no longer works.
查看英文版
查看中文版
補充資料
edit中可用的命令
-
Edit is only able to open a file with a maximum of 65,280 lines.
-
If your mouse drivers are not loaded while in MS-DOS or the Windows command line, you may have no mouse support. It is still possible to navigate the Editor using shortcut keys as seen in the below list.
-
Pressing Alt allows you to quickly navigate through edit without having to memorize all the commands listed below.
Commands available in edit查看英文版
查看中文版
其他命令行
echo | edlin | emm 386 | enable | endlocal | erase | exit | expand | extract |